XXXIX Simposio Nacional de la Unión Científica Internacional de Radio - URSI 2024, Cuenca (Spain). 04-06 September 2024
Summary:
This paper presents a 3D-printed prototype of a novel top-metalized Dielectric Resonator Antenna (DRA). The inclusion of top metallization induces a modification in the boundary conditions, resulting in a frequency reduction in the fundamental mode of the DRA. Still, it does not degrade its radiation performance. The dielectric part is manufactured using fused deposition modeling (FDM) printing techniques and a commercially available Zirconia-loaded filament. The prototype presents a –10-dB bandwidth from 2.54 to 2.68 GHz with a minimum of –21 dB at 2.60 GHz. The radiation maxima occur in the top and bottom directions, with a simulated gain of 2.7 dBi. Thus, a low-cost and fast method to implement and manufacture
a miniaturized DRA is presented.
Publication date: 2024-09-04.
Citation:
P. Sofokleous, F.J. Herraiz-Martínez, E. Paz, E. Márquez-Segura, P. Padilla, M. Pérez-Escribano, A 3D-printed prototype of a miniaturized top-metalized rectangular Dielectric Resonator Antenna, XXXIX Simposio Nacional de la Unión Científica Internacional de Radio - URSI 2024, Cuenca (Spain). 04-06 September 2024.
